How to Hard Reset PDA i-Mate JAQ3

How to Hard Reset i-Mate JAQ3

Factory or Hard Reset:

A factory reset, also known as master reset, is a software restore of an electronic device to its original system state by erasing all of the information stored on the device in an attempt to restore the device’s software to its original manufacturer settings. Doing so will erase all of the data, settings, and applications that were previously on the device. This is usually done to fix a software issue that the device is facing, but it could also be done to restore the device to its original settings.


Soft Reset:

Remove the battery cover and using the stylus, press on the small button to the left of the battery. Otherwise simply remove the battery, wait a few seconds and then insert the battery again.

.

Here We Perform hard reset on the i-Mate JAQ3

CAUTION:

Before Starting you should ensure that you have taken Backup your data from your mobile and save the program if there is unsaved data before normal or full reset.

Hard Reset VIA Settings:

1. Tap Start > Settings > System tab > Master Clear
2. On the System tab, select the Master Clear (!) icon
3. Proceed to enter the confirmation code: 1234 and push reset button,
system will auto reboot to complete the operation.

Hard Reset VIA Buttons:

1. Turn off your device.
2. Hold down the Send button, End button and Camera button.
3. Do not release Send, End and Camera, press the Power button.
4. After on-screen indication, release all the buttons.